Blokant CAMP Turbohand gray left
Code: CAMP2634L2Product detailed description
The Turbohand is a hand-held blocker that makes it easier to climb the rope. It uses cutting-edge technology and an innovative design that makes the ascent safer, faster and more rope-friendly. It uses a patented spinner that not only helps the rope move more smoothly, but also reduces friction and therefore the risk of rope damage. Ergon The omic rubberized handle extends to the top of the blocker, making it very efficient to use the other hand to climb up. The CAMP Turbohand is in parallel position with the rope when ascending, thus ensuring the best and most efficient climb. Three large eyelets, two on the bottom and one on the top of the block are used for optimal organisation of accessories. The Turbohand is available in both right and left hand versions and is suitable for ropes from 8mm to 13mm. The robust body is made of 3.5mm thick aluminium alloy. The toothed cam has a special anti-wear finish and is fitted with holes to help prevent the build-up of dirt. The opening system is protected against accidental opening from both sides. The presence of the bell also allows the Turbohand to be used as a locking pulley for loads up to 50kg. WARNING: This configuration does not allow the use of a blocking device for pulling or securing people. A steel helper (Turbohand Guide, sold separately) can be added with two screws on the bottom of the blocker for better rope stability during long ascents.
Properties:
- Patented bell system
- Thanks to the roller shutter, it can be used as a self-locking pulley up to a max load of 50kg (however, it must not be used for pulling people !)
- Roller for better guidance and rope saving
- Toothed cam with holes for dirt removal
- Ergonomic rubberised handle
- Adapted for second hand assistance
- 3 large holes for carabiners
- Expandable with CAMP Turbohand Guide
- Robust 3.5mm thick aluminium alloy body
- Colour variants for left and right hand
- EN 12841/B for semi-statics with a diameter of 10-13mm
- EN 567 air semi-static in diameter 8-13mm
- EAC
- Use: Rope access, masts and industrial structures, tree climbing / arboriculture, roof work, self-protection
Parameters:
- Warranty period: 2 years
- Weight: 185 grams
- Supported rope diameter: 8-13mm
- EN 12841/B for semi-statics with a diameter of 10-13mm
- EN 567 air semi-static in diameter 8-13mm
- EAC
Additional parameters
Category: | Hand rope clamps |
---|---|
EAN: | 8005436101385 |
Kód produktu: | 2634L2 |
Barva: | šedá |
Treatment: | left |
Be the first who will post an article to this item!
Only registered users may post articles. Please log in or register.
Be the first who will post an article to this item!